Details

---

BUY JQX-115F-005-1ZS1 https://www.utsource.net/itm/p/12604179.html

Parameter	Description	Value
Part Number	Product Identifier	JQX-115F-005-1ZS1
Type	Relay Type	SPDT
Coil Voltage	Operating Voltage of the Coil	5VDC
Coil Resistance	Resistance of the Coil	70惟
Contact Form	Configuration of Switch Contacts	Single Pole Double Throw
Contact Rating	Maximum Current and Voltage that Contacts Handle	10A, 250VAC / 24VDC
Insulation Voltage	Dielectric Strength Between Terminals	2500VAC
Operating Temp.	Temperature Range for Operation	-40掳C to +85掳C
Storage Temp.	Temperature Range for Storage	-40掳C to +85掳C
Dimensions	Size of the Relay	17.5mm x 12.3mm x 13.7mm
Weight	Weight of the Relay	6g

Instructions:

1. Installation: Ensure the relay is installed in a location where it can operate within its specified temperature range (-40掳C to +85掳C).
2. Coil Connection: Connect the coil terminals to a 5VDC power source ensuring correct polarity.
3. Contact Wiring: Wire the load to the common (COM) and normally open (NO) or normally closed (NC) contacts as per your application requirements.
4. Insulation Check: Before use, verify the insulation voltage between all terminals to ensure it meets the minimum requirement of 2500VAC.
5. Handling Care: Avoid exposing the relay to excessive mechanical shock or vibration.
6. Maintenance: Regularly inspect the relay for any signs of damage or wear. Replace if necessary.
7. Disposal: Dispose of the relay according to local regulations concerning electronic components.

(For reference only)