Details

---

BUY 2512 CHIP RESISTOR 0.056惟(56MR) 卤1% 1W https://www.utsource.net/itm/p/12604183.html

Parameter	Value
Resistor Type	Chip Resistor
Resistance	0.056 惟 (56 m惟)
Tolerance	卤1%
Power Rating	1W
Size	2512
Operating Temperature	-55掳C to +125掳C
Soldering Temperature	260掳C for 10 seconds
Insulation Resistance	>1000 M惟 at 250VDC
Moisture Sensitivity Level	MSL 3 (168 hours)

Instructions:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Use appropriate ESD (Electrostatic Discharge) precautions.

2. Mounting:

   • Ensure the PCB (Printed Circuit Board) is clean and free from contaminants.
   • Place the resistor on the PCB according to the design layout.
   • Use a reflow soldering process with a peak temperature of 260掳C for no more than 10 seconds.

3. Soldering:

   • Preheat the PCB to reduce thermal shock.
   • Apply a suitable amount of solder paste to the pads.
   • Use a soldering iron or reflow oven to solder the resistor.
   • Ensure the solder joints are smooth and free from voids.

4. Inspection:

   • Visually inspect the solder joints for proper wetting and alignment.
   • Use a multimeter to verify the resistance value and ensure it falls within the specified tolerance range.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in the original packaging until ready for use to maintain moisture sensitivity levels.

6. Disposal:

   • Follow local regulations for the disposal of electronic components.
   • Consider recycling options to minimize environmental impact.

(For reference only)