Details

---

BUY KSD301 B90 90掳C NORMALLY CLOSE JUMP TYPE TEMPERATURE CONTROL SWITCH THERMOSTATS (5PCS) https://www.utsource.net/itm/p/12604190.html

Parameter	Value
Model	KSD301 B90
Type	Temperature Control Switch Thermostat
Action	Normally Closed (NC)
Trip Temperature	90掳C
Reset Type	Jump Type
Quantity	5 Pieces
Contact Form	Single Pole, Single Throw (SPST)
Contact Material	AgSnCdO
Rated Voltage	250VAC
Rated Current	10A
Insulation Resistance	>100M惟 at 500VDC
Dielectric Strength	2000VAC for 1 minute
Operating Humidity	90% RH max
Operating Temperature	-40掳C to 125掳C
Thermal Shock Resistance	-40掳C to 125掳C
Terminal Type	Quick Connect Terminals
Dimensions (L x W x H)	16mm x 10mm x 8mm
Weight	2g

Instructions:

1. Installation:

   • Ensure the thermostat is installed in a location where it can accurately sense the temperature.
   • Connect the terminals to the appropriate circuit using quick connect terminals.

2. Operation:

   • The switch is normally closed (NC) and will open when the temperature reaches 90掳C.
   • After tripping, the switch will reset automatically when the temperature drops below the trip point.

3. Handling:

   • Handle with care to avoid damaging the sensitive components.
   • Do not expose the thermostat to extreme temperatures or humidity outside the specified operating range.

4. Maintenance:

   • Regularly inspect the contacts and terminals for signs of wear or corrosion.
   • Clean the thermostat with a dry cloth if necessary.

5. Storage:

   • Store in a dry, cool place away from direct sunlight and sources of heat.

6. Safety:

   • Ensure the thermostat is disconnected from the power source before installation or maintenance.
   • Follow all local electrical codes and regulations.

7. Troubleshooting:

   • If the thermostat fails to trip or reset, check the connections and ensure the temperature is within the specified range.
   • If issues persist, replace the thermostat.

(For reference only)