Details

---

BUY 943-1C-24DS 24V 12A 5PINS https://www.utsource.net/itm/p/12604195.html

Parameter	Value
Part Number	943-1C-24DS
Voltage Rating	24V
Current Rating	12A
Pin Count	5
Operating Temperature	-40掳C to +85掳C
Insulation Resistance	>100M惟 at 500V DC
Dielectric Strength	1500V AC for 1 minute
Contact Resistance	<5m惟
Terminal Type	Screw terminals
Mounting Type	Panel mount

Instructions:

1. Installation:

   • Ensure the device is powered off before installation.
   • Mount the relay on a suitable panel using the provided mounting hardware.
   • Connect the wires to the screw terminals, ensuring they are securely fastened.

2. Wiring:

   • Pin 1 (Common): Connect to the load or circuit you want to control.
   • Pin 2 (Normally Open): Connect to the power source when the relay is activated.
   • Pin 3 (Normally Closed): Connect to the power source when the relay is not activated.
   • Pin 4 (Coil Positive): Connect to the positive terminal of the control voltage (24V).
   • Pin 5 (Coil Negative): Connect to the negative terminal of the control voltage (24V).

3. Operation:

   • When a 24V DC signal is applied across the coil (Pins 4 and 5), the relay will switch, connecting the common terminal (Pin 1) to the normally open terminal (Pin 2).
   • When the 24V DC signal is removed, the relay will return to its default state, connecting the common terminal (Pin 1) to the normally closed terminal (Pin 3).

4. Maintenance:

   • Regularly inspect the connections and terminals for any signs of wear or corrosion.
   • Ensure the operating environment is within the specified temperature range to avoid damage to the relay.

5. Safety:

   • Do not exceed the rated voltage and current.
   • Use appropriate fuses or circuit breakers to protect the relay from overcurrent conditions.
   • Always follow local electrical codes and regulations.

(For reference only)