Details

---

BUY SRD-12VDC-SL-C 12V 10A T73 5PINS https://www.utsource.net/itm/p/12604216.html

Parameter	Value
Model Number	SRD-12VDC-SL-C
Type	Relay
Voltage (Vdc)	12V
Current Rating (A)	10A
Pin Configuration	5-Pin (T73)
Contact Form	SPDT (Single Pole Double Throw)
Coil Resistance	90 Ohms
Operating Temperature	-40掳C to +85掳C
Insulation Resistance	>100 M惟 at 500Vdc
Dielectric Strength	1500Vrms for 1 minute
Contact Material	Silver Alloy
Operate Time	<10 ms
Release Time	<10 ms
Life Expectancy	100,000 operations (mechanical)
Weight	35g

Instructions:

1. Power Supply: Connect the 12V DC power supply to the coil pins (usually marked as 85 and 86).
2. Control Signal: Apply a control signal to the coil pins to energize the relay.
3. Load Connection: Connect the load to the common (COM) and normally open (NO) or normally closed (NC) contacts.
4. Mounting: Ensure the relay is mounted securely to prevent vibration and mechanical stress.
5. Wiring: Use appropriate gauge wires to handle the current rating of the relay.
6. Protection: Consider using a flyback diode across the coil to protect against voltage spikes when the relay is de-energized.
7. Environmental Conditions: Operate the relay within the specified temperature range to ensure reliable performance.
8. Maintenance: Periodically inspect the relay for signs of wear or damage, especially in high-vibration environments.

(For reference only)