Details

---

BUY G5V-2-H1-24VDC 24V 1A 8PINS https://www.utsource.net/itm/p/12604232.html

Parameter	Value
Part Number	G5V-2-H1-24VDC
Voltage Rating	24V DC
Current Rating	1A
Pin Configuration	8-Pins
Relay Type	SPDT (Single Pole Double Throw)
Coil Voltage	24V DC
Coil Resistance	Refer to datasheet
Operating Temperature	-40掳C to +85掳C
Insulation Resistance	>100M惟 at 500V DC
Dielectric Strength	1500V AC for 1 minute
Contact Material	AgSnO2 (Silver Tin Oxide)
Contact Form	SPDT
Electrical Life	100,000 operations
Mechanical Life	10,000,000 operations

Instructions:

1. Installation:

   • Ensure the relay is mounted on a flat and stable surface.
   • Connect the coil terminals to the appropriate control circuit using wires of suitable gauge.

2. Wiring:

   • Connect the common (COM), normally open (NO), and normally closed (NC) contacts as required by your application.
   • Ensure all connections are secure and insulated properly to prevent short circuits.

3. Operation:

   • Apply the rated voltage to the coil terminals to actuate the relay.
   • Verify that the contacts switch correctly under load conditions.

4. Maintenance:

   • Periodically inspect the relay for any signs of damage or wear.
   • Ensure the operating environment remains within the specified temperature range.

5. Safety:

   • Always disconnect power before performing any maintenance or installation.
   • Use appropriate personal protective equipment when handling electrical components.

(For reference only)