Details

---

BUY G2R-2-SN-24VDC 24V 5A 8PINS https://www.utsource.net/itm/p/12604251.html

Parameter	Value
Product Code	G2R-2-SN-24VDC
Voltage Rating	24V DC
Current Rating	5A
Pin Count	8 Pins
Type	Relay
Coil Voltage	24V DC
Contact Form	SPDT (Single Pole Double Throw)
Operating Temperature	-40掳C to +85掳C

Instructions for Use:

1. Installation:

   • Ensure the relay is installed in a dry, clean environment within the specified operating temperature range.
   • Secure the relay using the mounting method recommended by the manufacturer.

2. Wiring:

   • Connect the coil terminals to a 24V DC power supply.
   • Wire the load to the normally open (NO) and common (COM) terminals for switch activation when the relay is energized.
   • Wire the normally closed (NC) and common (COM) terminals if you need the circuit to be closed when the relay is not energized.

3. Operation:

   • Apply 24V DC to the coil terminals to energize the relay, causing the contacts to switch from NC to NO positions.
   • Remove the voltage to return the contacts to their default state.

4. Safety Precautions:

   • Do not exceed the rated voltage and current limits.
   • Avoid connecting or disconnecting wires while the relay is energized.
   • Ensure proper insulation of connections to prevent short circuits.

5. Maintenance:

   • Regularly inspect connections for signs of wear or corrosion.
   • Replace the relay if it shows signs of malfunction or damage.

(For reference only)