Details

---

BUY STTH512B-TR https://www.utsource.net/itm/p/12604260.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VDD	1.6	-	5.5	V
Output Current	IOUT	-	200	-	mA	Ta = 25掳C
Operating Temperature	TOPR	-40	-	85	掳C
Storage Temperature	TSTG	-65	-	150	掳C
Quiescent Current	IQ	-	10	-	渭A	VDD = 3V
Input Offset Voltage	VOS	-	2	-	mV	VDD = 3V
Bandwidth	BW	-	1.4	-	MHz	VDD = 3V
Slew Rate	SR	-	0.7	-	V/渭s	VDD = 3V
Power-down Current	IPD	-	0.01	-	渭A

Instructions for STTH512B-TR

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 1.6V to 5.5V.
   • Avoid exceeding the maximum supply voltage to prevent damage.

2. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 85掳C for optimal performance.
   • Store the device between -65掳C and 150掳C.

3. Current Handling:

   • The output current should not exceed 200mA at room temperature (25掳C).

4. Quiescent and Power-down Current:

   • Monitor the quiescent current, which typically stays around 10渭A at a supply voltage of 3V.
   • In power-down mode, the current draw drops to approximately 0.01渭A.

5. Signal Integrity:

   • For best signal integrity, operate within the specified bandwidth of up to 1.4MHz at 3V supply.
   • Be mindful of the slew rate, which is around 0.7V/渭s at the same supply voltage.

6. Offset Voltage:

   • An input offset voltage of around 2mV can be expected under typical operating conditions with a 3V supply.

Ensure all parameters are within specified limits to guarantee reliable operation. Always refer to the datasheet for more detailed information and specific application notes.

(For reference only)