Details

---

BUY KSD301 B80 80°C NORMALLY CLOSE JUMP TYPE TEMPERATURE CONTROL SWITCH THERMOSTATS (5PCS) https://www.utsource.net/itm/p/12604290.html

Parameter	Specifications
Model Number	KSD301 B80
Type	Temperature Control Switch Thermostat
Switching Mechanism	Normally Closed (NC)
Action Type	Jump Type
Rated Voltage	250V AC
Rated Current	10A
Temperature Setting	80°C
Operating Temperature Range	-40°C to 125°C
Differential Temperature	Typically 10-15°C above set temperature
Contact Resistance	≤ 50mΩ
Insulation Resistance	≥ 100MΩ at 500V DC
Dielectric Strength	2500V AC for 1 minute
Mechanical Life	10,000 cycles
Electrical Life	5,000 cycles
Mounting Method	Snap-in or screw mount
Dimensions	Diameter: 16mm, Height: 12.5mm
Weight	Approx. 5g

Instructions:

1. Installation: Ensure the thermostat is installed in a location where it can accurately sense the temperature of the environment or component it is meant to control.
2. Wiring: Connect the switch according to the wiring diagram provided by the manufacturer. The normally closed contacts will open when the temperature exceeds 80°C.
3. Testing: After installation, test the operation of the thermostat to ensure it operates correctly at the specified temperature setting.
4. Maintenance: Periodically check the thermostat for signs of wear or damage. Replace if necessary.
5. Handling: Handle with care to avoid damaging the internal components. Avoid exposure to extreme temperatures outside the operating range.

(For reference only)