Details

---

BUY KSD301 B70 70掳C NORMALLY CLOSE JUMP TYPE TEMPERATURE CONTROL SWITCH THERMOSTATS (5PCS) https://www.utsource.net/itm/p/12604306.html

Parameter	Value
Model Number	KSD301 B70
Type	Temperature Control Switch Thermostat
Switching Type	Normally Closed (NC)
Operating Temperature	70掳C
Reset Type	Jump Type
Contact Form	SPST-1C (Single Pole Single Throw - 1 Closed)
Maximum Current	16A
Maximum Voltage	250VAC / 125VDC
Housing Material	Phenolic Resin
Terminal Type	Quick Connect (QD)
Operating Humidity	95% RH at 40掳C
Insulation Resistance	>100M惟 at 500VDC
Dielectric Strength	1800VAC for 1 minute
Operating Life	10,000 cycles
Storage Temperature	-40掳C to +85掳C
Mounting Method	Snap-in or Screw Mount
Dimensions	20mm x 16mm x 14mm (L x W x H)
Weight	10g
Package Quantity	5 PCS

Instructions for Use:

1. Installation:

   • Ensure the thermostat is installed in a location where it will not be obstructed by other components.
   • Use the snap-in or screw mount method to secure the thermostat in place.
   • Connect the wires to the quick connect terminals.

2. Wiring:

   • Connect the load to the normally closed (NC) terminal.
   • Connect the power source to the common (COM) terminal.
   • Ensure all connections are tight and secure to prevent loose connections.

3. Operation:

   • The switch will remain closed until the temperature reaches 70掳C.
   • When the temperature exceeds 70掳C, the switch will open, breaking the circuit.
   • Once the temperature drops below the reset point, the switch will automatically jump back to the closed position, restoring the circuit.

4. Maintenance:

   • Regularly inspect the thermostat for any signs of damage or wear.
   • Clean the thermostat with a dry cloth to remove dust and debris.
   • Replace the thermostat if it shows signs of malfunction or if it has reached its operating life limit.

5. Precautions:

   • Do not exceed the maximum current and voltage ratings.
   • Avoid exposing the thermostat to temperatures outside its operating range.
   • Ensure proper ventilation around the thermostat to prevent overheating.
   • Do not modify the thermostat as this can affect its performance and safety.

(For reference only)