Details

---

BUY KSD301 B160 160掳C NORMALLY CLOSE JUMP TYPE TEMPERATURE CONTROL SWITCH THERMOSTATS (5PCS) https://www.utsource.net/itm/p/12604307.html

Parameter	Description
Model Number	KSD301 B160
Type	Temperature Control Switch Thermostat
Temperature Rating	160掳C
Contact Configuration	Normally Closed (NC)
Switching Action	Jump Type
Operating Voltage	Max 250V AC
Rated Current	Max 10A
Differential	10-20掳C
Hysteresis	10-20掳C
Insulation Resistance	>100M惟 at 250V DC
Dielectric Strength	1800V AC for 1 minute
Operating Temperature	-40掳C to 125掳C
Storage Temperature	-40掳C to 125掳C
Material	Metal Case, Glass Fiber, Ceramic
Mounting Method	Screw Mounting
Weight	Approx. 10g
Package Quantity	5 pieces

Instructions for Use

1. Installation:

   • Ensure the thermostat is installed in a location where it can accurately sense the temperature of the environment or device.
   • Use the provided screws to securely mount the thermostat to the surface.

2. Wiring:

   • Connect the common terminal (C) to the power source.
   • Connect the normally closed terminal (NC) to the load or circuit you want to control.
   • Ensure all connections are tight and secure to prevent any electrical issues.

3. Operation:

   • The switch will remain closed (circuit on) until the temperature reaches 160掳C.
   • At 160掳C, the switch will open (circuit off) to cut off the power to the load.
   • The switch will reset when the temperature drops by 10-20掳C below the set point (140-150掳C).

4. Maintenance:

   • Regularly inspect the thermostat for any signs of damage or wear.
   • Clean the thermostat with a dry cloth to remove dust and debris.
   • Do not use water or solvents to clean the thermostat.

5. Precautions:

   • Do not exceed the maximum operating voltage and current ratings.
   • Ensure the thermostat is used in a well-ventilated area to prevent overheating.
   • Do not modify the thermostat as this can affect its performance and safety.

6. Storage:

   • Store the thermostat in a dry, cool place away from direct sunlight and extreme temperatures.
   • Avoid exposure to corrosive chemicals and environments.

7. Troubleshooting:

   • If the thermostat does not operate correctly, check the wiring connections and ensure they are secure.
   • Verify that the power supply is within the rated voltage range.
   • If the issue persists, consult a qualified technician for further assistance.

(For reference only)