Details

---

BUY ICL7106CPL https://www.utsource.net/itm/p/12604309.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	-	2.2	5.5	20	V
Operating Temperature	TOPR	-	-40		85	掳C
Storage Temperature	TSTG	-	-55		150	掳C
Input Voltage Range	VIN	-	-	0	VCC	V
Zero-Scale Input Voltage	VZS	-	-	0	+	mV
Full-Scale Input Voltage	VFS	-	-	200	+	mV
Input Bias Current	IB	-	-	20	+	pA
Input Offset Current	IOS	-	-	3	+	pA
CMRR (Common Mode Rejection Ratio)	CMRR	f = 50/60 Hz	-	90	+	dB
PSRR (Power Supply Rejection Ratio)	PSRR	f = 50/60 Hz	-	80	+	dB
Conversion Time	tC	-	-	100	+	ms
Display Update Rate	fU	-	-	2.5	+	Hz

Instructions for Using the ICL7106CPL

1. Power Supply:

   • Connect the supply voltage (V_CC) to the appropriate pin.
   • Ensure the supply voltage is within the specified range (2.2V to 20V).

2. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 85掳C.
   • Store the device within the temperature range of -55掳C to 150掳C.

3. Input Signals:

   • Apply input voltages within the range of 0V to V_CC.
   • Adjust the zero-scale input voltage (V_ZS) to ensure accurate readings.
   • Set the full-scale input voltage (V_FS) to the desired level, typically around 200mV.

4. Bias and Offset Currents:

   • Account for the input bias current (I_B) and input offset current (I_OS) when designing the input circuitry to minimize errors.

5. Rejection Ratios:

   • Utilize the high CMRR and PSRR to reject common mode and power supply noise, especially at 50/60 Hz.

6. Conversion and Display:

   • The conversion time is approximately 100 ms, and the display update rate is 2.5 Hz.
   • Ensure that the display update rate is suitable for your application.

7. Calibration:

   • Calibrate the device to ensure accurate readings by adjusting the zero-scale and full-scale inputs as needed.

8. Protection:

   • Implement proper protection circuits to prevent damage from overvoltage or reverse polarity.

9. Layout:

   • Use good PCB layout practices to minimize noise and interference, particularly for the analog input and power supply lines.

10. Documentation:

    • Refer to the datasheet for detailed specifications and additional information on the ICL7106CPL.

(For reference only)