Details

---

BUY (20PCS) DIP METAL FILM RESISTOR 1% 2W 0.27惟(0.27R) https://www.utsource.net/itm/p/12604316.html

Parameter	Value
Package Quantity	20PCS
Type	DIP Metal Film Resistor
Tolerance	1%
Power Rating	2W
Resistance	0.27惟 (0.27R)

Instructions:

1. Handling: Handle the resistors with care to avoid damage. Avoid excessive bending or twisting of leads.
2. Installation: Ensure that the resistor is placed in the correct orientation on the circuit board. Although polarity is not a concern for resistors, proper placement ensures ease of troubleshooting and neatness.
3. Soldering: Use a soldering iron at an appropriate temperature (typically around 350掳C). Ensure good contact between the resistor leads and the PCB pads before applying solder.
4. Cooling: Allow the resistors to cool naturally after soldering. Do not subject them to rapid cooling as this can cause thermal shock.
5. Inspection: After installation, inspect the solder joints for quality. Ensure there are no shorts or cold solder joints.
6. Storage: Store unused resistors in a dry, cool place away from direct sunlight to prevent degradation over time.

(For reference only)