Details

---

BUY ALQ105 REPLACE JQ1P-5V-F 5V 10A 5PINS https://www.utsource.net/itm/p/12604334.html

Parameter	Description
Part Number	ALQ105 REPLACE JQ1P-5V-F
Voltage Rating	5V
Current Rating	10A
Pin Configuration	5 Pins
Operating Temperature	-40掳C to +85掳C
Mounting Type	Through-hole
Package/Case	Relay, 5-Pin, DIP

Instructions:

1. Installation:

   • Ensure the circuit board has the correct footprint for a 5-pin relay.
   • Carefully insert the relay into the PCB ensuring that all pins are aligned with their respective holes.
   • Solder each pin securely, making sure not to bridge any connections.

2. Wiring:

   • Connect the coil terminals (pins 1 and 5) to the control circuit providing 5V.
   • Connect the common terminal (pin 2) to the load circuit.
   • Connect the normally open (NO) terminal (pin 3) and normally closed (NC) terminal (pin 4) as required by your application.

3. Operation:

   • When voltage is applied across the coil terminals, the relay will energize, switching the contacts.
   • The relay can handle up to 10A on the contact side, suitable for controlling higher power devices.

4. Safety Precautions:

   • Do not exceed the maximum current rating of 10A to avoid damage or failure.
   • Ensure proper ventilation if used in an enclosed space to prevent overheating.
   • Always disconnect power before performing any maintenance or modifications.

5. Storage:

   • Store in a dry, cool place away from direct sunlight and corrosive substances.

(For reference only)