Details

---

BUY SLI-S-112DM 240V 30A 4PINS https://www.utsource.net/itm/p/12604345.html

Parameter	Value
Part Number	SLI-S-112DM
Voltage Rating	240V AC
Current Rating	30A
Number of Pins	4
Operating Temperature	-40掳C to 85掳C
Terminal Type	Screw Terminal
Insulation Resistance	>100M惟 at 500V
Dielectric Strength	2500V AC for 1 minute
Mounting Style	Through-Hole
Package Type	Rectangular

Instructions:

1. Installation:

   • Ensure the device is powered off before installation.
   • Connect the input and output wires to the appropriate terminals using the screw terminals provided.
   • Tighten the screws securely to ensure a good electrical connection.

2. Mounting:

   • Mount the component on a flat, stable surface using the through-hole mounting method.
   • Ensure there is adequate ventilation around the component to prevent overheating.

3. Operation:

   • Once installed, power on the device and verify that it operates within the specified voltage and current ratings.
   • Monitor the temperature of the component during operation to ensure it does not exceed the maximum operating temperature.

4. Maintenance:

   • Regularly inspect the connections and terminals for signs of wear or corrosion.
   • If any issues are detected, power off the device and replace the faulty components as necessary.

5. Safety Precautions:

   • Always follow local electrical codes and regulations.
   • Use appropriate personal protective equipment (PPE) when handling electrical components.
   • Do not exceed the rated voltage and current specifications to avoid damage or safety hazards.

(For reference only)