Details

---

BUY KSD301 B65 65掳C NORMALLY CLOSE JUMP TYPE TEMPERATURE CONTROL SWITCH THERMOSTATS (5PCS) https://www.utsource.net/itm/p/12604383.html

Parameter	Specification
Model	KSD301 B65
Type	Temperature Control Switch, Thermostat
Switching Action	Normally Closed (NC)
Trip Temperature	65掳C
Reset Type	Jump Type (Automatic Reset)
Contact Form	NC
Max Current Rating	16A
Max Voltage Rating	250VAC
Differential	卤5掳C
Operating Temperature	-40掳C to 105掳C
Insulation Resistance	>100M惟 at 500VDC
Dielectric Strength	2500VAC for 1 minute
Mechanical Life	10,000 cycles minimum
Electrical Life	5,000 cycles minimum
Mounting Orientation	Vertical or Horizontal
Package Quantity	5 pieces

Instructions:

1. Installation:

   • Ensure the switch is installed in a location where it can accurately sense the temperature of the environment or component it is intended to control.
   • Mount the thermostat securely to prevent movement or misalignment that could affect its operation.

2. Wiring:

   • Connect the normally closed contacts according to your circuit design. Ensure all connections are secure and insulated properly to avoid short circuits.
   • Refer to the wiring diagram provided by the manufacturer or consult an electrical professional if unsure.

3. Testing:

   • Before final installation, test the switch to ensure it operates correctly at the specified temperature. Gradually increase the temperature around the switch and verify it opens at approximately 65掳C.
   • After resetting, confirm that the switch returns to its normally closed state.

4. Maintenance:

   • Periodically check the connections and mounting to ensure they remain secure and corrosion-free.
   • Avoid exposing the switch to excessive mechanical stress or environments outside its operating temperature range.

5. Safety:

   • Always disconnect power before handling or installing the switch.
   • Ensure the switch is used within its rated current and voltage limits to avoid damage or failure.

(For reference only)