Details

---

BUY ST232EBN https://www.utsource.net/itm/p/12604398.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Input Voltage	VI	-40	-	60	V	Continuous
Output Voltage	VO	5	-	15	V	Continuous
Peak Output Current	IOPK	-	1.5	-	A	Pulse width < 50 ms
Continuous Output Current	IOCONT	-	1	-	A	TA = 25掳C
Thermal Shutdown Temperature	TSD	-	170	-	掳C	Typical
Operating Junction Temperature	TJOP	-40	-	150	掳C	Continuous
Storage Temperature	TSTG	-65	-	150	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the input voltage (V_I) is within the specified range (-40V to 60V) to avoid damage to the device.
   • The output voltage (V_O) should be set between 5V and 15V depending on the application requirements.

2. Current Handling:

   • The device can handle peak currents up to 1.5A for short pulses (less than 50 ms).
   • For continuous operation, the output current should not exceed 1A at ambient temperatures of 25掳C.

3. Thermal Management:

   • The device has a thermal shutdown feature that activates at approximately 170掳C to prevent overheating.
   • Ensure proper heat sinking or cooling mechanisms are in place to keep the junction temperature (T_JOP) below 150掳C during continuous operation.

4. Environmental Conditions:

   • The device can operate in environments with ambient temperatures ranging from -40掳C to 150掳C.
   • Store the device in a temperature-controlled environment between -65掳C and 150掳C to ensure long-term reliability.

5. Handling and Installation:

   • Handle the device with care to avoid mechanical stress or damage.
   • Follow recommended soldering profiles and PCB layout guidelines to ensure reliable performance.

6. Safety Precautions:

   • Always use appropriate safety equipment when handling high voltages.
   • Ensure all connections are secure and properly insulated to prevent electrical shorts or shocks.

For detailed specifications and additional information, refer to the official ST232EBN datasheet provided by STMicroelectronics.

(For reference only)