Details

---

BUY (5PCS) DIP CERAMIC RESISTOR 5% 10W 1K https://www.utsource.net/itm/p/12604413.html

Parameter	Value
Package Quantity	5PCS
Package Type	DIP
Material	Ceramic
Tolerance	5%
Power Rating	10W
Resistance	1K惟

Instructions:

1. Handling: Handle the resistors with care to avoid damaging the ceramic body and connections.
2. Installation: Ensure that the resistor is securely mounted on the circuit board or in the intended device. Pay attention to correct orientation if specified.
3. Soldering: Use a temperature-controlled soldering iron to avoid overheating, which can damage the component. The recommended soldering temperature should not exceed 300掳C for more than 3 seconds per connection.
4. Verification: After installation, verify the resistance value using a multimeter to ensure it matches the specified 1K惟 within the 5% tolerance.
5. Power Consideration: Ensure that the power dissipation in your application does not exceed the 10W rating of the resistor to prevent overheating and potential failure.
6. Storage: Store unused resistors in a dry, cool place away from direct sunlight and sources of heat.

(For reference only)