Details

---

BUY (100PCS) 0805 CHIP RESISTOR 1% 1/8W 30.1K https://www.utsource.net/itm/p/12604416.html

Parameter	Value
Quantity	100 PCS
Package Size	0805
Tolerance	1%
Power Rating	1/8W (0.125W)
Resistance	30.1K惟
Operating Voltage	50V
Temperature Range	-55掳C to +125掳C
Operating Frequency	1MHz
RoHS Compliant	Yes
Soldering Method	Reflow or Hand Solder

Instructions:

1. Handling:

   • Handle with care to avoid damaging the resistors.
   • Use appropriate ESD (Electrostatic Discharge) precautions.

2. Mounting:

   • Ensure the PCB is clean and free from contaminants.
   • Place the resistor on the PCB according to the design layout.
   • Use reflow soldering for mass production or hand soldering for small quantities.

3. Soldering:

   • Preheat the PCB to around 100掳C to 150掳C to minimize thermal shock.
   • Apply a small amount of solder paste to the pads if using reflow soldering.
   • For hand soldering, use a fine-tip soldering iron set to approximately 350掳C to 400掳C.
   • Apply solder to the joint and hold the resistor in place until the solder solidifies.

4. Inspection:

   • Visually inspect the solder joints for proper wetting and absence of cold solder joints.
   • Use a multimeter to verify the resistance value and ensure it matches the specified 30.1K惟.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging to protect from static and physical damage.

6. Disposal:

   • Dispose of any defective or unused components in accordance with local environmental regulations.

(For reference only)