Details

---

BUY NCP1014AP065G P1014AP06 DIP7 https://www.utsource.net/itm/p/12604418.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Operating Range	7.5	-	36	V
Output Voltage	VOUT	Fixed	-	5	-	V
Output Current	IOUT	Continuous	-	1	1.2	A
Switching Frequency	fSW	Typical	-	100	-	kHz
Quiescent Current	IQ	No Load	-	1	-	mA
Efficiency	畏	At Full Load	-	85	-	%
Dropout Voltage	VDROPOUT	At Full Load	-	1.2	-	V
Thermal Shutdown	TSD	Activation	-	160	-	掳C
Package Type	-	-	-	DIP-7	-	-

Instructions for NCP1014AP065G P1014AP06 DIP7:

1. Installation:

   • Ensure the correct orientation of the DIP-7 package on the PCB.
   • Solder all pins securely to ensure good electrical contact.

2. Input Voltage:

   • Supply an input voltage between 7.5V and 36V.
   • Use appropriate decoupling capacitors at the input to reduce noise and transients.

3. Output Voltage:

   • The device provides a fixed output voltage of 5V.
   • Ensure the load connected does not exceed the maximum output current.

4. Output Current:

   • The regulator can supply up to 1.2A continuously.
   • For higher currents, consider heat dissipation or a heatsink.

5. Switching Frequency:

   • Operates typically at 100kHz, which helps in choosing external components like inductors and capacitors.

6. Efficiency:

   • Optimize the efficiency by selecting low ESR capacitors and minimizing trace lengths.

7. Thermal Considerations:

   • Monitor the junction temperature to prevent thermal shutdown.
   • Maintain ambient temperature below 160掳C to avoid damage.

8. Protection Features:

   • The device includes thermal shutdown and overcurrent protection to safeguard against faults.

9. Application Notes:

   • Refer to the datasheet for detailed application circuits and design considerations.

(For reference only)