Details

---

BUY 2512 CHIP RESISTOR 5% 1W 100R https://www.utsource.net/itm/p/12604419.html

Parameter	Value
Type	Chip Resistor
Size	2512
Tolerance	5%
Power Rating	1W
Resistance	100惟

Instructions:

1. Handling:

   • Handle with care to avoid damage.
   • Use appropriate ESD (Electrostatic Discharge) precautions.

2. Mounting:

   • Ensure the PCB (Printed Circuit Board) is clean and free from contaminants.
   • Place the resistor on the designated pads.
   • Solder the resistor using a temperature-controlled soldering iron.
   • Ensure good thermal contact between the resistor and the PCB for optimal heat dissipation.

3. Soldering:

   • Preheat the PCB to reduce thermal shock.
   • Apply a small amount of flux to the pads.
   • Solder each end of the resistor, ensuring a solid connection.
   • Avoid overheating; the maximum soldering temperature should not exceed 350掳C for more than 10 seconds.

4. Testing:

   • After soldering, check the resistance value using a multimeter to ensure it meets the specified tolerance.
   • Verify that the resistor is securely attached and there are no shorts or open circuits.

5. Storage:

   • Store in a dry, cool place to prevent moisture damage.
   • Keep away from direct sunlight and sources of heat.

(For reference only)