Details

---

BUY KSD301 B40 40掳C Normally Close Jump type Temperature Control Switch Thermostats (5pcs) https://www.utsource.net/itm/p/12604440.html

Parameter	Value/Description
Model	KSD301 B40
Type	Temperature Control Switch, Thermostat
Switching Type	Normally Closed (NC)
Action Type	Jump Type
Rated Voltage	250V AC
Rated Current	10A
Switching Capacity	250V AC, 10A
Operating Temperature	40掳C
Differential	卤5掳C (Typical)
Hysteresis	5掳C (Typical)
Contact Resistance	< 50m惟
Insulation Resistance	> 100M惟 at 500V DC
Dielectric Strength	2500V AC for 1 minute
Mounting Method	Screw Terminal
Dimensions	18mm (Diameter) x 16mm (Height)
Weight	5g
Material	Housing: Phenolic Resin, Contacts: Silver Alloy
Operating Environment	-20掳C to 85掳C, Non-condensing humidity
Compliance	RoHS, CE
Package Quantity	5 pcs

Instructions for Use

1. Installation:

   • Ensure the device is powered off before installation.
   • Connect the wires to the screw terminals securely.
   • Mount the thermostat in a location where it can accurately sense the temperature.

2. Operation:

   • The switch will remain closed (conducting) until the temperature reaches 40掳C.
   • At 40掳C, the switch will open (disconnect), breaking the circuit.
   • The switch will reset when the temperature drops by approximately 5掳C (hysteresis).

3. Maintenance:

   • Regularly inspect the connections for any signs of wear or damage.
   • Clean the thermostat with a dry cloth if necessary.
   • Do not use solvents or abrasive materials as they may damage the housing.

4. Troubleshooting:

   • If the switch does not operate correctly, check the wiring connections and ensure they are secure.
   • Verify that the power supply is within the rated voltage range.
   • If issues persist, consult the manufacturer or a qualified technician.

5. Storage:

   • Store in a dry, cool place away from direct sunlight and extreme temperatures.
   • Avoid exposure to corrosive substances and high humidity environments.

(For reference only)