Details

---

BUY MCC220-16io1 https://www.utsource.net/itm/p/12604452.html

Parameter	Description
Product Name	MCC220-16io1
Type	I/O Module
Input Channels	16 digital inputs
Output Channels	16 digital outputs
Voltage Level	Inputs: 5V to 24V DC, Outputs: 5V to 24V DC
Isolation	Channel-to-channel and channel-to-ground isolation (2500Vrms)
Communication	Modbus RTU over RS-485
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +85掳C
Relative Humidity	5% to 95% non-condensing
Power Supply	9V to 30V DC
Power Consumption	< 1W
Dimensions	100mm x 70mm x 25mm
Weight	150g

Instructions for Use

1. Power Connection

   • Connect the power supply to the designated terminals ensuring the voltage is within the specified range (9V to 30V DC).

2. Signal Wiring

   • Wire the input and output channels according to your application needs. Ensure proper voltage levels are applied as per the specifications.

3. Communication Setup

   • Configure the RS-485 communication settings on the module using the DIP switches or software configuration tool.
   • Set the Modbus address and baud rate to match the network setup.

4. Installation

   • Mount the module in a suitable location considering environmental conditions and accessibility for maintenance.

5. Testing

   • After installation, perform a system test to ensure all inputs and outputs function correctly and communicate properly over the network.

6. Maintenance

   • Regularly inspect connections and wiring for any signs of wear or damage.
   • Ensure the operating environment remains within the specified temperature and humidity ranges.

(For reference only)