Details

---

BUY Single row straight pin single plastic 1X40P pitch 2.54mm needle 11mm (5pcs) https://www.utsource.net/itm/p/12604454.html

Parameter	Value
Type	Single Row Straight Pin
Configuration	1X40P
Pitch	2.54mm
Needle Length	11mm
Quantity	5pcs
Material	Plastic

Instructions:

1. Handling:

   • Handle the pins with care to avoid bending or damaging the needles.
   • Use appropriate tools such as pliers or a pin insertion tool for assembly.

2. Insertion:

   • Align the pins with the corresponding holes on the PCB or breadboard.
   • Insert the pins gently, ensuring they are straight and fully seated.
   • If resistance is felt, check for any misalignment before applying more force.

3. Soldering:

   • Pre-tin the pins and the PCB pads for better solder flow.
   • Apply heat evenly to both the pin and the pad.
   • Use a suitable amount of solder to ensure a strong connection without creating bridges.

4. Inspection:

   • After soldering, inspect each joint for proper alignment and solder quality.
   • Ensure there are no shorts or cold solder joints.

5. Storage:

   • Store unused pins in a dry, clean environment to prevent corrosion.
   • Keep them in a container or bag to avoid loss or damage.

(For reference only)