Details

---

BUY PM-T44P Sensors Transducers Optical Sensors,Photoelectric Switch with line length 1 meter https://www.utsource.net/itm/p/12604464.html

Parameter	Specification
Model	PM-T44P
Type	Optical Sensor, Photoelectric Switch
Line Length	1 meter
Detection Method	Through-beam
Operating Voltage	10 to 30 VDC
Current Consumption	≤70 mA (at 24VDC)
Response Time	≤1 ms
Output Type	NPN/PNP (configurable)
Output Current	Max. 500 mA
Switching Frequency	Max. 2 kHz
Ambient Temperature	-25°C to +70°C
Storage Temperature	-40°C to +85°C
Housing Material	PBT (Polybutylene Terephthalate)
Protection Class	IP67
Connection	M12 connector

Instructions for Use:

1. Installation:

   • Ensure the sensor is mounted in a stable location where it can effectively detect objects.
   • The emitter and receiver should be aligned directly opposite each other without any obstructions.

2. Electrical Connection:

   • Connect the sensor to a power supply within the specified voltage range (10 to 30 VDC).
   • Use the M12 connector for secure electrical connections.

3. Configuration:

   • Set the output type (NPN or PNP) according to your control system requirements.
   • Adjust sensitivity if necessary using the potentiometer provided on the sensor.

4. Operation:

   • Power on the sensor and ensure it is functioning by checking the status LED.
   • Verify that the detection distance and response time meet the application needs.

5. Maintenance:

   • Regularly inspect the sensor for dirt or debris that may affect performance.
   • Clean the sensor surface with a soft cloth as needed.

6. Safety Precautions:

   • Do not exceed the maximum operating voltage to prevent damage.
   • Avoid exposure to environments exceeding the temperature specifications.

(For reference only)