Details

---

BUY 2W10 https://www.utsource.net/itm/p/12604466.html

Parameter	Description	Value
Part Number	Full part number	2W10
Type	Type of component	Resistor
Power Rating	Maximum power dissipation (W)	2 W
Resistance	Nominal resistance value (惟)	10 惟
Tolerance	Resistance tolerance (%)	卤5%
Operating Temperature	Temperature range for operation (掳C)	-55 to +155
Max Voltage	Maximum voltage rating (V)	70 V
Case Size	Physical dimensions (L x W x H, mm)	6.3 x 3.2 x 1.8
Material	Material used for resistor body	Carbon Film
Termination	Type of termination	Axial Leads
Compliance	Compliance standards	RoHS, REACH

Instructions for Use

1. Mounting:

   • Ensure that the leads are not bent too close to the body to avoid mechanical stress.
   • Solder the leads quickly to prevent excessive heat from damaging the resistor.

2. Soldering:

   • Use a soldering iron with a temperature setting no higher than 350掳C.
   • Solder each lead for no more than 3 seconds.

3. Handling:

   • Handle the resistor by the body, not the leads, to avoid damage.
   • Store in a dry, cool place to prevent moisture damage.

4. Testing:

   • Measure the resistance using a multimeter to ensure it is within the specified tolerance.
   • Check for any visual signs of damage before use.

5. Environmental Considerations:

   • The resistor is compliant with RoHS and REACH regulations.
   • Dispose of the component according to local environmental regulations.

6. Operational Precautions:

   • Do not exceed the maximum power rating or operating temperature.
   • Ensure adequate ventilation if the resistor will be dissipating significant power.

(For reference only)