Details

---

BUY KSD-01F D85 85°C Normally Close Temperature Control Switch Thermostats https://www.utsource.net/itm/p/12604467.html

Parameter	Specification
Model	KSD-01F D85
Type	Normally Closed (NC)
Operating Temperature	85°C
Switching Differential	Approximately 5°C
Maximum Load	16A, 250VAC
Contact Resistance	≤ 50mΩ
Insulation Resistance	≥ 100MΩ at 500VDC
Dielectric Strength	2500VAC for 1 minute
Operating Humidity	40-95% RH, non-condensing
Operating Voltage	AC 250V, DC 24V
Terminal Type	Quick connect terminals
Dimensions	17mm x 17mm x 23mm (L x W x H)
Weight	Approx. 10g

Instructions:

1. Installation:

   • Ensure the switch is installed in a location where it can accurately sense the temperature of the environment or component it is intended to monitor.
   • Connect the wires to the quick connect terminals securely.

2. Usage:

   • The thermostat will automatically close the circuit when the temperature drops below the set point (85°C) and open when the temperature exceeds this point.
   • Do not exceed the maximum load capacity to avoid damage or malfunction.

3. Maintenance:

   • Periodically check the connections for tightness and corrosion.
   • Avoid exposing the thermostat to environments outside its operating temperature and humidity range.

4. Safety Precautions:

   • Handle with care to prevent physical damage.
   • Disconnect power before performing any maintenance or installation tasks.
   • Ensure proper ventilation around the thermostat to prevent overheating.

(For reference only)