Details

---

BUY IRGP4640D-E https://www.utsource.net/itm/p/12604479.html

Parameter	Symbol	Test Conditions	Min	Typ	Max	Unit
Collector-Emitter Voltage	VCEO	IC = 0, TJ = 25掳C	-	600	-	V
Gate-Emitter Voltage	VGE	IC = 0, TJ = 25掳C	-15	0	15	V
Continuous Collector Current	IC	TC = 25掳C	-	16	-	A
Continuous Collector Current (TC = 75掳C)	IC(TC = 75掳C)	TC = 75掳C	-	12	-	A
Pulse Collector Current	IC(pulse)	TC = 25掳C, tp = 10 渭s, duty cycle = 1%	-	32	-	A
Total Power Dissipation	PT	TC = 25掳C	-	180	-	W
Junction to Case Thermal Resistance	R胃JC	-	-	0.62	-	掳C/W
Junction to Ambient Thermal Resistance	R胃JA	-	-	40	-	掳C/W
Turn-On Delay Time	td(on)	VGE = 15V, IC = 10A, RG = 1惟	-	90	-	ns
Rise Time	tr	VGE = 15V, IC = 10A, RG = 1惟	-	60	-	ns
Turn-Off Delay Time	td(off)	VGE = -15V, IC = 10A, RG = 1惟	-	120	-	ns
Fall Time	tf	VGE = -15V, IC = 10A, RG = 1惟	-	90	-	ns

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper heat sinking to maintain junction temperature within safe limits.
   • Handle with care to avoid damage to the pins and the die.

2. Biasing:

   • Apply the appropriate gate-emitter voltage (V_GE) to control the transistor.
   • Ensure the gate resistor (R_G) is correctly chosen to limit gate current and reduce switching losses.

3. Thermal Management:

   • Monitor the junction temperature (T_J) to ensure it does not exceed the maximum rating.
   • Use thermal paste between the transistor and the heatsink to improve thermal conductivity.

4. Current and Voltage Ratings:

   • Do not exceed the maximum collector-emitter voltage (V_CEO) or continuous collector current (I_C).
   • For pulse applications, ensure the pulse duration and duty cycle are within specified limits.

5. Switching Characteristics:

   • Optimize the turn-on and turn-off times by adjusting the gate resistance (R_G).
   • Be aware of the turn-on delay time (t_d(on)), rise time (t_r), turn-off delay time (t_d(off)), and fall time (t_f) to minimize switching losses.

6. Storage and Operation:

   • Store in a dry, cool environment to prevent moisture damage.
   • Operate within the specified temperature range to ensure reliable performance.

7. Testing:

   • Use the test conditions provided in the parameter table for accurate measurements.
   • Regularly check the device parameters to ensure they remain within the specified limits.

8. Safety:

   • Follow all safety guidelines when handling high voltages and currents.
   • Use appropriate protective equipment and follow best practices for electrical safety.

(For reference only)