Details

---

BUY 2010 Chip Resistor 5% 1/2W 2R2 https://www.utsource.net/itm/p/12604484.html

Parameter	Value
Part Number	2010 Chip Resistor
Resistance	2.2 惟 (2R2)
Tolerance	卤5%
Power Rating	1/2 W (0.5 W)
Operating Voltage	50 V
Temperature Range	-55掳C to +125掳C
Operating Frequency	1 MHz
Soldering Temperature	260掳C (max)
Case Size	2010 (Metric) / 0805 (Imperial)
Material	Thick Film
Packaging	Bulk, Tape & Reel

Instructions for Use:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Avoid exposure to high humidity and corrosive environments.

2. Mounting:

   • Ensure the PCB is clean and free from contaminants.
   • Place the resistor on the PCB according to the design layout.
   • Apply solder paste or flux to the pads.
   • Solder the resistor using a soldering iron or reflow oven.
   • Ensure the soldering temperature does not exceed 260掳C to prevent damage.

3. Soldering:

   • Use a soldering iron with a fine tip to avoid overheating adjacent components.
   • Apply solder to both ends of the resistor until the joints are smooth and shiny.
   • Inspect the solder joints for proper wetting and absence of cold solder joints.

4. Testing:

   • After soldering, use a multimeter to verify the resistance value.
   • Ensure the measured resistance is within the specified tolerance (卤5%).

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging to protect from static and physical damage.

6. Disposal:

   • Dispose of any defective or unused resistors in accordance with local environmental regulations.

(For reference only)