Details

---

BUY BTS5020-2E https://www.utsource.net/itm/p/12604506.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VIN	-40	-	40	V	Continuous operation
Continuous Current	IC	-	120	-	A	@ TA = 25掳C
Peak Current	IP	-	200	-	A	tp = 1 ms, @ TA = 25掳C
On-State Resistance	RDS(on)	-	3.9	-	m惟	@ VGS = 10V, ID = 120A
Gate Charge	QG	-	115	-	nC	@ VGS = 10V, ID = 120A
Switching Time (Turn-On)	ton	-	15	-	ns	@ VGS = 10V, ID = 120A
Switching Time (Turn-Off)	toff	-	25	-	ns	@ VGS = 10V, ID = 120A
Thermal Resistance (Junction to Case)	R胃JC	-	0.5	-	掳C/W	-
Maximum Junction Temperature	TJ(max)	-	-	175	掳C	-
Storage Temperature Range	TSTG	-40	-	150	掳C	-

Instructions for Use:

1. Supply Voltage (V_IN):

   • Ensure the supply voltage is within the range of -40V to 40V to avoid damage to the device.

2. Continuous Current (I_C):

   • The device can handle a continuous current of up to 120A at ambient temperature (T_A) of 25掳C. Higher temperatures may require derating.

3. Peak Current (I_P):

   • The peak current capability is 200A for a pulse duration of 1 ms at an ambient temperature of 25掳C. Exceeding this can cause overheating and potential failure.

4. On-State Resistance (R_DS(on)):

   • The on-state resistance is typically 3.9 m惟 at a gate-source voltage (V_GS) of 10V and a drain current (I_D) of 120A. This value affects power dissipation.

5. Gate Charge (Q_G):

   • The gate charge is 115 nC at a gate-source voltage (V_GS) of 10V and a drain current (I_D) of 120A. This parameter is important for switching applications.

6. Switching Times:

   • Turn-on time (t_on) is 15 ns and turn-off time (t_off) is 25 ns at a gate-source voltage (V_GS) of 10V and a drain current (I_D) of 120A. These values help in designing the switching circuit.

7. Thermal Management:

   • The thermal resistance from the junction to the case (R_胃JC) is 0.5掳C/W. Proper heat sinking is crucial to manage the junction temperature, which should not exceed 175掳C.

8. Storage Temperature:

   • Store the device in an environment where the temperature ranges from -40掳C to 150掳C to ensure long-term reliability.

9. Handling Precautions:

   • Handle the device with care to avoid electrostatic discharge (ESD). Use appropriate ESD protection measures during handling and installation.

10. Mounting:

    • Ensure proper mounting to a heatsink or PCB with adequate thermal conductivity to dissipate heat effectively.

By following these parameters and instructions, you can ensure optimal performance and longevity of the BTS5020-2E.

(For reference only)