Details

---

BUY FSQ510 https://www.utsource.net/itm/p/12604510.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7	-	5.5	V	Operating supply voltage range
Output Current	IOUT	-	100	300	mA	Continuous output current
Switching Frequency	fSW	400	500	600	kHz	Switching frequency
Efficiency	畏	80	-	90	%	Efficiency at typical load
Quiescent Current	IQ	1	2	3	渭A	Current consumption in standby
Dropout Voltage	VDROPOUT	0.3	-	0.5	V	Voltage drop in dropout condition

Instructions for FSQ510

1. Power Supply Connection:

   • Connect the positive terminal of the power supply to the VDD pin.
   • Connect the negative terminal (GND) of the power supply to the GND pin.

2. Load Connection:

   • Connect the load between the OUT pin and GND.

3. Capacitor Connections:

   • Place an input capacitor (typically 1 渭F) between VDD and GND close to the device.
   • Place an output capacitor (as recommended by the application note) between OUT and GND.

4. Operation:

   • Ensure the supply voltage is within the specified range (2.7V to 5.5V).
   • The device will regulate the output voltage as per the design, maintaining efficiency within the stated limits.

5. Safety Considerations:

   • Do not exceed the maximum ratings provided in the parameter table.
   • Ensure proper heat dissipation if operating near maximum output current.

6. Troubleshooting:

   • If the output voltage does not stabilize, check the connections and ensure capacitors are correctly placed and rated.
   • Verify that the input voltage is within the acceptable range.

(For reference only)