Details

---

BUY KSD-01F D45 45掳C Normally Close Temperature Control Switch Thermostats https://www.utsource.net/itm/p/12604511.html

Parameter	Value
Model	KSD-01F D45
Type	Temperature Control Switch (Thermostat)
Operating Temperature	45掳C
Contact Type	Normally Closed (NC)
Maximum Current	10A
Maximum Voltage	250VAC
Power Rating	2500W
Operating Differential	卤5掳C
Terminal Type	Quick Connect
Mounting Method	Snap Fit
Housing Material	Phenolic Resin
Operating Environment	Indoor Use Only
Certification	UL, CUL, VDE, TUV, CE

Instructions for Use:

1. Installation:

   • Ensure the power is disconnected before installation.
   • Mount the thermostat in a location where it will not be exposed to direct heat sources or drafts.
   • Use the snap fit mounting method to secure the thermostat in place.

2. Wiring:

   • Connect the load wire to the common terminal (COM).
   • Connect the control wire to the normally closed (NC) terminal.
   • Ensure all connections are tight and secure to prevent loose connections.

3. Operation:

   • The switch will close (activate) when the temperature drops below 45掳C.
   • The switch will open (deactivate) when the temperature rises above 45掳C 卤5掳C.
   • Do not exceed the maximum current and voltage ratings to avoid damage to the thermostat.

4. Maintenance:

   • Regularly inspect the thermostat for signs of wear or damage.
   • Clean the thermostat with a dry cloth to remove dust and debris.
   • Replace the thermostat if it fails to operate correctly or shows signs of damage.

5. Safety Precautions:

   • Do not use the thermostat in environments with explosive gases or high humidity.
   • Do not modify the thermostat as this can void the warranty and cause safety hazards.
   • Always follow local electrical codes and regulations.

(For reference only)