Details

---

BUY KSD-01F D75 75掳C Normally Close Temperature Control Switch Thermostats https://www.utsource.net/itm/p/12604512.html

Parameter	Description
Model	KSD-01F D75
Type	Temperature Control Switch, Thermostat
Switch Type	Normally Closed (NC)
Operating Temperature	75掳C
Contact Form	SPST-NC (Single Pole Single Throw - Normally Closed)
Nominal Current	16A
Nominal Voltage	250V AC
Insulation Resistance	>100M惟 at 500V DC
Dielectric Strength	2500V AC for 1 minute without breakdown or flashover
Terminal Connection	Quick Connect Terminal
Dimensions	Diameter: 14mm, Height: 8.5mm
Weight	Approximately 3g

Instructions for Use

1. Installation:

   • Ensure the switch is installed in a location where it can accurately sense the temperature of the component or environment it is intended to monitor.
   • Secure the thermostat using appropriate mounting methods to ensure stability and accurate readings.

2. Wiring:

   • Connect the wires to the quick connect terminals ensuring a secure and tight connection to avoid loose connections which can lead to failure.
   • Follow local electrical codes and guidelines for wiring practices.

3. Operation:

   • The switch will remain closed until the ambient temperature reaches 75掳C. Once this temperature is reached, the switch opens, breaking the circuit.
   • As the temperature drops below the set point, the switch will automatically reset to its normally closed position.

4. Maintenance:

   • Regularly inspect the thermostat for any signs of damage or wear.
   • Clean the thermostat as necessary to prevent dust accumulation that could affect performance.

5. Safety Precautions:

   • Do not exceed the rated voltage and current to prevent damage or malfunction.
   • Ensure proper ventilation around the thermostat to allow accurate temperature sensing.
   • Always disconnect power before performing any maintenance or installation tasks.

(For reference only)