Details

---

BUY AQZ207 https://www.utsource.net/itm/p/12604535.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Supply Voltage	Vcc	3.0	-	5.5	V	Operating range for supply voltage
Output Current	Iout	-	100	-	mA	Maximum continuous output current
Output Voltage	Vout	-	Vcc-1.2	-	V	Output voltage regulation
Quiescent Current	Iq	-	20	-	渭A	Current consumed by the device when active but not driving a load
Dropout Voltage	Vdo	-	250	-	mV	Voltage difference between input and output for regulation
Thermal Shutdown	TSD	-	160	-	掳C	Temperature at which the device will shut down to prevent damage
Short-Circuit Current	Isc	-	1.2	-	A	Maximum current during short-circuit condition
Operating Temperature	Topr	-40	-	85	掳C	Range of ambient temperatures for normal operation
Storage Temperature	Tstg	-65	-	150	掳C	Range of temperatures for storage

Instructions:

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the specified range (3.0V to 5.5V) to avoid damage or improper operation.

2. Output Current (Iout):

   • The device can provide up to 100mA continuously. Exceeding this limit may cause overheating or damage.

3. Output Voltage (Vout):

   • The output voltage is regulated to approximately Vcc - 1.2V. Ensure this meets your application requirements.

4. Quiescent Current (Iq):

   • The device consumes about 20渭A when active but not driving a load. This is important for low-power applications.

5. Dropout Voltage (Vdo):

   • The dropout voltage is typically 250mV. Ensure the input voltage is at least 250mV higher than the desired output voltage for proper regulation.

6. Thermal Shutdown (TSD):

   • The device will shut down if the temperature exceeds 160掳C to prevent damage. Allow adequate heat dissipation in high-current applications.

7. Short-Circuit Current (Isc):

   • The device can handle short-circuit conditions with a maximum current of 1.2A. However, prolonged short circuits should be avoided.

8. Operating Temperature (Topr):

   • The device operates reliably between -40掳C and 85掳C. Ensure the ambient temperature stays within this range.

9. Storage Temperature (Tstg):

   • The device can be stored between -65掳C and 150掳C without damage. However, avoid prolonged exposure to extreme temperatures.

10. Mounting and Handling:

    • Follow standard ESD (Electrostatic Discharge) precautions when handling the device.
    • Ensure proper mounting to avoid mechanical stress on the leads.

11. Application Circuit:

    • Refer to the datasheet for recommended application circuits and component values to ensure optimal performance.

(For reference only)