Details

---

BUY G2R-2A-12VDC G2R-2A-ASI-12VDC 12V 5A 6PINS https://www.utsource.net/itm/p/12604541.html

Parameter	G2R-2A-12VDC / G2R-2A-ASI-12VDC
Supply Voltage	12V DC
Rated Current	5A
Number of Pins	6
Operating Temperature Range	-20掳C to +70掳C
Storage Temperature Range	-40掳C to +85掳C
Humidity Range	5% to 95% (Non-condensing)
Insulation Resistance	>100M惟 at 500V DC
Dielectric Strength	1500V AC for 1 minute
Contact Resistance	<50m惟
Life Cycle	10,000 operations

Instructions:

1. Installation:

   • Ensure the relay is installed in a well-ventilated area to prevent overheating.
   • Connect the power supply to the designated pins as per the pinout diagram provided.

2. Wiring:

   • Connect the 12V DC power supply to the power pins.
   • Connect the control signal to the coil pins to activate the relay.
   • Connect the load to the switch contacts.

3. Operation:

   • Apply 12V DC to the coil pins to energize the relay.
   • The normally open (NO) contacts will close, and the normally closed (NC) contacts will open when the relay is energized.
   • When the power is removed from the coil, the relay returns to its default state.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay with a soft, dry cloth to remove dust and debris.

5. Safety:

   • Do not exceed the rated voltage and current specifications.
   • Ensure the relay is disconnected from the power source before performing any maintenance or installation.
   • Use appropriate fuses or circuit breakers to protect the relay from overcurrent conditions.

6. Storage:

   • Store the relay in a dry, cool place away from direct sunlight and corrosive substances.

(For reference only)