Details

---

BUY AOZ1212AI https://www.utsource.net/itm/p/12604550.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Input Voltage	VIN	2.7	-	5.5	V	Operating range
Output Voltage	VOUT	-	1.2	-	V	Fixed output voltage
Output Current	IOUT	-	2.0	-	A	Continuous output current
Quiescent Current	IQ	-	30	-	渭A	At no load, VIN = 5V
Dropout Voltage	VDROPOUT	-	200	-	mV	At IOUT = 2.0A
Power Supply Rejection Ratio	PSRR	60	-	-	dB	At 100kHz
Operating Temperature	TOPR	-40	-	125	掳C	Junction temperature range
Storage Temperature	TSTG	-65	-	150	掳C	Storage temperature range

Instructions for Use

1. Input Voltage (VIN):

   • Ensure the input voltage is within the specified range of 2.7V to 5.5V.
   • Do not exceed the maximum input voltage to avoid damaging the device.

2. Output Voltage (VOUT):

   • The AOZ1212AI provides a fixed output voltage of 1.2V. No external components are required to set this voltage.

3. Output Current (IOUT):

   • The device can deliver a continuous output current of up to 2.0A. Ensure the load does not exceed this limit to prevent overheating or damage.

4. Quiescent Current (IQ):

   • The quiescent current is approximately 30渭A at no load and an input voltage of 5V. This low quiescent current helps in minimizing power consumption in low-load conditions.

5. Dropout Voltage (VDROPOUT):

   • The dropout voltage is typically 200mV at a full load of 2.0A. This means the input voltage should be at least 1.4V higher than the output voltage (1.2V) to ensure proper regulation.

6. Power Supply Rejection Ratio (PSRR):

   • The PSRR is 60dB at 100kHz, indicating good rejection of input voltage variations, which helps in maintaining a stable output voltage.

7. Operating Temperature (TOPR):

   • The device is designed to operate within a junction temperature range of -40掳C to 125掳C. Ensure adequate heat dissipation to keep the device within this range, especially under high load conditions.

8. Storage Temperature (TSTG):

   • Store the device in an environment with a temperature range of -65掳C to 150掳C to maintain its performance and reliability.

9. Mounting and Layout:

   • Use a good quality PCB layout with short traces to minimize parasitic inductance and resistance.
   • Place the input and output capacitors close to the device to improve stability and transient response.
   • Ensure proper thermal management by using a heatsink if necessary, especially for high-power applications.

10. Capacitor Selection:

    • Use low ESR (Equivalent Series Resistance) capacitors for both input and output to optimize performance.
    • Typical values for input capacitance (CIN) are 10渭F to 47渭F, and for output capacitance (COUT) are 10渭F to 22渭F.

11. Protection Features:

    • The AOZ1212AI includes over-temperature protection and short-circuit protection to safeguard the device from damage under fault conditions.

By following these guidelines, you can ensure optimal performance and reliability of the AOZ1212AI in your application.

(For reference only)