Details

---

BUY G2R-1-E-12VDC 12V 16A 8PINS https://www.utsource.net/itm/p/12604570.html

Parameter	Value
Part Number	G2R-1-E-12VDC
Voltage	12V DC
Current Rating	16A
Pin Count	8
Operating Temperature	-40掳C to +85掳C
Insulation Resistance	100M惟 at 500V DC
Dielectric Strength	1000V AC for 1 minute
Contact Resistance	< 50m惟
Mechanical Life	10,000 cycles
Electrical Life	10,000 cycles (resistive load)
Mounting	Panel mount
Terminal Type	Quick-connect terminals

Instructions:

1. Installation:

   • Ensure the relay is installed in a location that meets the operating temperature range.
   • Use the provided quick-connect terminals to connect the relay to your circuit.
   • Secure the relay to the panel using the appropriate mounting hardware.

2. Wiring:

   • Connect the control circuit to the coil terminals (pins 1 and 8).
   • Connect the load circuit to the common (COM) and normally open (NO) or normally closed (NC) terminals as required.
   • Verify all connections are secure and correct before applying power.

3. Operation:

   • Apply 12V DC to the coil terminals to energize the relay.
   • The normally open (NO) contacts will close, and the normally closed (NC) contacts will open when the relay is energized.
   • When the voltage is removed, the relay will return to its default state.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay contacts with a dry, lint-free cloth if necessary.
   • Replace the relay if it fails to operate correctly or shows signs of excessive wear.

5. Safety:

   • Do not exceed the rated voltage and current.
   • Ensure the relay is disconnected from the power source before performing any maintenance.
   • Follow all local electrical codes and safety guidelines.

(For reference only)