Details

---

BUY GS4B60KD1 https://www.utsource.net/itm/p/12604607.html

Parameter	Description	Value
Part Number	Full part number	GS4B60KD1
Type	Device type	4-Channel MOSFET Driver IC
Supply Voltage (Vcc)	Operating supply voltage range	4.5V to 28V
Output Current (Iout)	Maximum output current per channel	1.5A (peak)
Input Voltage (Vin)	Input logic level voltage range	1.8V to 5.5V
Propagation Delay	Time delay from input to output	50ns (typical)
Operating Temperature (Tamb)	Ambient operating temperature range	-40掳C to 125掳C
Storage Temperature (Tstg)	Storage temperature range	-65掳C to 150掳C
Package	Package type	SOIC-16
Pin Count	Number of pins	16
Quiescent Current (Iq)	Supply current when no load	1mA (typical)
Output Configuration	Output configuration	High-side, Low-side
Protection Features	Built-in protection features	Overvoltage, Overcurrent, Thermal Shutdown

Instructions for Use:

1. Power Supply Connection:

   • Connect the Vcc pin to the power supply within the specified range (4.5V to 28V).
   • Connect the GND pin to the ground.

2. Input Logic Levels:

   • Ensure that the input signals to the IN1, IN2, IN3, and IN4 pins are within the specified logic level range (1.8V to 5.5V).

3. Output Load Connection:

   • Connect the load between the OUT1, OUT2, OUT3, and OUT4 pins and the appropriate power supply or ground, depending on whether you are using high-side or low-side outputs.

4. Thermal Management:

   • Ensure proper heat dissipation by mounting the device on a heatsink if operating at high currents or temperatures.

5. Protection:

   • The device includes overvoltage, overcurrent, and thermal shutdown protection. However, it is recommended to design the circuit to avoid these conditions as much as possible.

6. Storage and Handling:

   • Store the device in a dry environment within the specified storage temperature range (-65掳C to 150掳C).
   • Handle with care to avoid damage to the pins and package.

7. Testing:

   • Before finalizing the design, test the device under various operating conditions to ensure it meets the required specifications.

(For reference only)