Details

---

BUY A45L-0001-0340 https://www.utsource.net/itm/p/12604609.html

Parameter	Value	Unit
Part Number	A45L-0001-0340
Type	Surface Mount
Package	0603
Resistance	1000	惟
Tolerance	卤1%
Power Rating	0.1	W
Operating Temp	-55 to +125	掳C
Temperature Coeff.	卤100	ppm/掳C
Insulation Resistance	1000	M惟
Capacitance	0	pF
Inductance	0	nH

Instructions:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Use appropriate ESD (Electrostatic Discharge) precautions to prevent damage.

2. Soldering:

   • Preheat components to 70-90掳C for 2-3 minutes before soldering.
   • Soldering temperature should not exceed 260掳C.
   • Soldering time should be limited to 10 seconds per joint.

3. Mounting:

   • Ensure the PCB is clean and free from contaminants.
   • Place the component on the PCB with the correct orientation.
   • Apply a small amount of solder paste to the pads before placing the component.

4. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Recommended storage temperature: -10 to +40掳C.
   • Humidity: <60% RH.

5. Inspection:

   • Visually inspect the component and solder joints for any defects.
   • Use a multimeter to check resistance and ensure it meets the specified tolerance.

6. Testing:

   • Perform functional testing after assembly to ensure proper operation.
   • Check for any short circuits or open circuits.

7. Disposal:

   • Dispose of the component according to local environmental regulations.

(For reference only)