Details

---

BUY HTB75-TP/SP3 https://www.utsource.net/itm/p/12604644.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Supply Voltage	Vcc	4.5	-	30	V
Continuous Current	Ic	-	2.5	5	A	@ Ta=25掳C
Peak Current	Icp	-	5	10	A	10ms pulse, @ Ta=25掳C
Control Input Voltage	Vin	0	-	5	V
Control Input Current	Iin	0	1.5	3	mA
Thermal Resistance	Rth	-	25	-	掳C/W	Junction to Ambient
Operating Temperature	Topr	-40	-	85	掳C
Storage Temperature	Tstg	-40	-	125	掳C

Instructions for Use:

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 4.5V to 30V.
   • Exceeding the maximum voltage can damage the device.

2. Continuous Current (Ic):

   • The continuous current should not exceed 5A at 25掳C ambient temperature.
   • For higher ambient temperatures, derate the current to avoid overheating.

3. Peak Current (Icp):

   • The peak current can be up to 10A for short pulses (10ms) at 25掳C ambient temperature.
   • Ensure the pulse duration does not exceed 10ms to prevent thermal damage.

4. Control Input Voltage (Vin):

   • The control input voltage should be between 0V and 5V.
   • Use a logic level signal to control the device.

5. Control Input Current (Iin):

   • The control input current should be between 0mA and 3mA.
   • Ensure the driving circuit can provide this current.

6. Thermal Management:

   • The thermal resistance from junction to ambient is 25掳C/W.
   • Use a heatsink if the device will operate at high currents or in high ambient temperatures.

7. Operating Temperature (Topr):

   • The device is designed to operate between -40掳C and 85掳C.
   • Avoid operating outside this range to ensure reliable performance.

8. Storage Temperature (Tstg):

   • Store the device between -40掳C and 125掳C.
   • Avoid exposing the device to extreme temperatures for extended periods.

9. Mounting and Handling:

   • Handle the device with care to avoid mechanical stress.
   • Follow proper soldering techniques to ensure a reliable connection.

10. Safety Precautions:

    • Always use appropriate safety measures when working with electrical components.
    • Ensure proper grounding and insulation to prevent electrical shock.

(For reference only)