Details

---

BUY G6DS-1A-24VDC https://www.utsource.net/itm/p/12604662.html

Parameter	Description
Model	G6DS-1A-24VDC
Type	Limit Switch
Power Supply	24 VDC
Current Consumption	Max. 10 mA
Switching Capacity	Max. 0.5 A @ 24 VDC
Contact Configuration	SPDT (Single Pole Double Throw)
Operating Force	Approx. 1.5 to 3 kgf
Reset Force	Approx. 0.75 kgf
Mechanical Life	10 million operations
Electrical Life	100,000 operations (resistive load)
Insulation Resistance	100 M惟 or more (@ 500 VDC)
Dielectric Strength	500 VAC for 1 minute
Ambient Operating Temperature	-25掳C to +70掳C
Storage Temperature	-40掳C to +85掳C
Weight	Approx. 25 g

Instructions:

1. Installation:

   • Ensure the switch is mounted securely in a position where it can be actuated by the intended mechanism.
   • Avoid mounting in environments with excessive dust, moisture, or corrosive gases.

2. Wiring:

   • Connect the common terminal to the power supply.
   • Connect the normally open (NO) and normally closed (NC) terminals according to your control circuit requirements.
   • Ensure all connections are tight and secure to prevent electrical issues.

3. Operation:

   • The switch operates when the actuator is pressed, changing the state of the contacts.
   • For optimal performance, ensure the actuation force is within the specified operating force range.

4. Maintenance:

   • Regularly inspect the switch for physical damage or wear.
   • Clean the switch as necessary using a soft cloth; avoid using abrasive materials or solvents.

5. Safety Precautions:

   • Do not exceed the rated voltage or current to prevent damage to the switch.
   • Ensure proper grounding of the equipment to protect against electrical hazards.

(For reference only)