Details

---

BUY G2E-184P-M-US-24V https://www.utsource.net/itm/p/12604670.html

Parameter	Description	Value
Part Number	Full part identification	G2E-184P-M-US-24V
Type	Relay type	SPDT (Single Pole Double Throw)
Coil Voltage	Voltage required to energize the relay coil	24V DC
Coil Current	Current drawn by the relay coil	10mA
Contact Form	Configuration of relay contacts	1C (1 Common)
Contact Rating	Maximum current and voltage the contacts can handle	10A, 250V AC / 24V DC
Insulation Resistance	Resistance between contacts	100M惟 at 500V DC
Dielectric Strength	Voltage the insulation can withstand	2500V AC for 1 minute
Operating Temperature	Temperature range for operation	-40掳C to +85掳C
Storage Temperature	Temperature range for storage	-40掳C to +85掳C
Mechanical Life	Expected number of operations without failure	10 million operations
Electrical Life	Expected number of operations under load	100,000 operations
Mounting	Method of attaching the relay	PCB mount
Terminal Type	Type of terminals provided	Quick connect
Dimensions	Physical size of the relay	17.5mm x 12.5mm x 13.5mm

Instructions:

1. Installation:

   • Ensure that the relay is installed in a well-ventilated area within the specified temperature range.
   • Use the provided quick-connect terminals for secure connections.

2. Coil Connection:

   • Connect the coil terminals to a 24V DC power supply.
   • Ensure correct polarity to avoid damage to the relay.

3. Load Connection:

   • Connect the load to the common (COM) and normally open (NO) or normally closed (NC) contacts based on your application requirements.
   • Do not exceed the contact ratings to prevent premature failure.

4. Operation:

   • When the coil is energized, the common terminal switches from NC to NO.
   • De-energizing the coil returns the common terminal to its default NC position.

5. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Replace the relay if any abnormalities are detected.

6. Safety Precautions:

   • Always disconnect power before performing any maintenance or installation.
   • Follow all local electrical codes and regulations.

(For reference only)