Details

---

BUY SGH30N60RUF https://www.utsource.net/itm/p/12604672.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Drain-Source Voltage	VDS	-	600	-	V
Gate-Source Voltage	VGS	-15	-	20	V
Continuous Drain Current (TC = 25掳C)	ID	-	30	-	A
Continuous Drain Current (TC = 100掳C)	ID	-	20	-	A
Pulse Drain Current (tp = 10 渭s, IDM = 100 A)	IDm	-	180	-	A
Total Power Dissipation (TC = 25掳C)	PTOT	-	360	-	W
Total Power Dissipation (TC = 100掳C)	PTOT	-	180	-	W
Junction Temperature	TJ	-	-	175	掳C
Storage Temperature Range	TSTG	-55	-	150	掳C
Thermal Resistance, Junction to Case	R胃JC	-	0.4	-	K/W
Thermal Resistance, Junction to Ambient	R胃JA	-	40	-	K/W

Instructions for Use:

1. Handling Precautions:

   • The SGH30N60RUF is sensitive to electrostatic discharge (ESD). Use proper ESD protection when handling the device.
   • Avoid mechanical stress on the leads and ensure they are not bent beyond the recommended bend radius.

2. Mounting:

   • Ensure good thermal contact between the device and the heatsink to maintain optimal operating temperatures.
   • Use thermal grease or a thermal pad to enhance heat transfer.

3. Biasing:

   • Apply the gate-source voltage (V_GS) within the specified range to avoid damaging the device.
   • For best performance, keep V_GS at the recommended level, typically around 10-15V for full turn-on.

4. Current Limiting:

   • Do not exceed the maximum continuous drain current (I_D) ratings, especially at higher temperatures.
   • For pulse applications, ensure the pulse duration and peak current do not exceed the specified limits.

5. Thermal Management:

   • Monitor the junction temperature (T_J) to ensure it does not exceed 175掳C.
   • Use appropriate cooling methods such as forced air cooling or liquid cooling if necessary.

6. Storage:

   • Store the device in a dry, cool place within the specified storage temperature range (-55掳C to 150掳C).

7. Testing:

   • Before integrating the device into a circuit, perform initial testing under controlled conditions to verify its functionality and performance.

8. Safety:

   • Always follow safety guidelines when working with high-voltage and high-current circuits to prevent injury or damage to equipment.

(For reference only)