Details

---

BUY (20PCS) DIP CARBON FILM RESISTOR 5% 1/2W 13K https://www.utsource.net/itm/p/12604679.html

Parameter	Value
Package Quantity	20PCS
Type	DIP Carbon Film Resistor
Tolerance	5%
Power Rating	1/2W (0.5W)
Resistance	13K惟 (13,000惟)

Instructions:

1. Identify the Resistor: Ensure that you have the correct resistor by checking its markings or using a multimeter to measure resistance.
2. Insert into Circuit: Carefully insert the leads of the resistor into your circuit board or breadboard. Ensure it is placed in the correct orientation if specified by your circuit design (though resistors are non-polarized and can be inserted either way).
3. Soldering: If mounting on a PCB, solder the leads to the board. Ensure the solder joints are clean and secure.
4. Trim Excess Leads: After soldering, trim any excess lead length to reduce the risk of short circuits.
5. Testing: Use a multimeter to verify the resistance value and ensure proper installation.
6. Storage: Store unused resistors in a dry place, away from moisture and corrosive environments.

(For reference only)