Details

---

BUY DSP1-DC12V-F 12V 5A 6PINS https://www.utsource.net/itm/p/12604684.html

Parameter	Value	Unit
Input Voltage	12	V
Output Current	5	A
Pin Count	6	-
Operating Temperature	-40 to 85	掳C
Efficiency	Up to 95%	-
Protection	Overcurrent, Overvoltage, Short Circuit	-

Instructions for Use:

1. Power Supply Connection:

   • Connect the positive terminal of the 12V DC power supply to the pin labeled "VCC" or "+12V".
   • Connect the negative terminal of the 12V DC power supply to the pin labeled "GND".

2. Load Connection:

   • Connect the load to the output pins labeled "OUT+" and "OUT-".
   • Ensure the load does not exceed 5A to avoid overcurrent protection triggering.

3. Mounting:

   • Mount the module on a flat surface with adequate ventilation to ensure proper heat dissipation.
   • Use a heatsink if operating at high current loads for extended periods.

4. Operation:

   • Turn on the power supply and check the output voltage and current using a multimeter.
   • Monitor the temperature of the module during operation to ensure it remains within the operating temperature range.

5. Protection Features:

   • The module includes overcurrent, overvoltage, and short circuit protection.
   • If any of these protections are triggered, the module will shut down to prevent damage. Once the issue is resolved, the module can be reset by cycling the power.

6. Storage:

   • Store the module in a dry, cool place away from direct sunlight and extreme temperatures.
   • Avoid exposure to corrosive environments to prevent damage to the module.

(For reference only)