Details

---

BUY G6E-134P-ST-US-24VDC G6E-134P-ST-US-DC24V 24V 3A 5PINS https://www.utsource.net/itm/p/12604715.html

Parameter	Value
Part Number	G6E-134P-ST-US-24VDC
Voltage Rating	24V DC
Current Rating	3A
Pin Configuration	5 pins
Type	Relay
Coil Voltage	24V DC
Contact Form	SPDT (Single Pole Double Throw)
Operating Temperature	-40掳C to +85掳C
Terminal Type	Quick connect
Mounting Style	Panel mount
Insulation Resistance	100 M惟 minimum at 500 VDC
Dielectric Strength	1000 VAC for 1 minute

Instructions:

1. Installation:

   • Ensure the relay is installed in a location that meets the operating temperature range.
   • Use the appropriate tools and safety equipment when handling electrical components.

2. Wiring:

   • Connect the coil terminals to a 24V DC power supply.
   • Wire the load to the common and normally open or normally closed contacts based on your application needs.

3. Operation:

   • When voltage is applied to the coil, the relay will switch the contacts.
   • Ensure the current through the contacts does not exceed 3A to prevent damage.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay as necessary with a soft cloth; do not use abrasive materials.

5. Safety:

   • Always disconnect power before performing any maintenance or wiring changes.
   • Follow all local electrical codes and regulations.

(For reference only)