Details

---

BUY G5V-1-12VDC 12V 1A 12V https://www.utsource.net/itm/p/12604716.html

Parameter	Value	Description
Type	G5V-1-12VDC	Relay type
Coil Voltage	12V DC	Operating voltage of the relay coil
Coil Current	1A	Maximum current rating for the coil
Contact Form	SPDT	Single Pole Double Throw configuration
Contact Rating	10A	Maximum switching current
Insulation Voltage	2500V AC RMS	Dielectric strength between contacts and coil
Mechanical Life	10 million cycles	Expected life under no-load conditions
Electrical Life	100,000 operations	Expected life under load conditions
Operating Temp. Range	-40掳C to +85掳C	Temperature range for operation

Instructions:

1. Installation: Ensure that the relay is installed in a location that allows for adequate ventilation and heat dissipation.
2. Wiring: Connect the coil terminals to a 12V DC power supply. The common (COM) terminal should be connected to the circuit that needs to be controlled, while NO (Normally Open) and NC (Normally Closed) terminals are used based on the control requirement.
3. Operation: When 12V DC is applied across the coil terminals, the relay will energize, causing the normally open contact to close and the normally closed contact to open.
4. Maintenance: Periodically inspect the relay for signs of wear or damage. Ensure connections are tight and free from corrosion.
5. Safety: Always disconnect the power before performing any maintenance or wiring changes.

(For reference only)