Details

---

BUY ML4824CS1 https://www.utsource.net/itm/p/12604750.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	2.7		5.5	V
Output Current	Iout	Continuous		100		mA
Quiescent Current	Iq	Vcc = 3V, no load		1.5		渭A
Dropout Voltage	Vdo	Iout = 100mA		300		mV
Load Regulation		Iout: 0 to 100mA		0.5		%
Line Regulation		Vcc: 2.7V to 5.5V		0.1		%
PSRR		@ 1kHz		60		dB
Operating Temp	Toper		-40		85	掳C

Instructions for ML4824CS1

1. Power Supply Connection:

   • Connect the supply voltage (Vcc) within the range of 2.7V to 5.5V.
   • Ensure stable power supply to avoid fluctuations that can affect performance.

2. Output Configuration:

   • The device can provide a continuous output current up to 100mA.
   • Check the load requirements and ensure they do not exceed this limit.

3. Quiescent Current Consideration:

   • At no load and with Vcc at 3V, the quiescent current is typically 1.5渭A. This is important for low-power applications.

4. Dropout Voltage Awareness:

   • When operating at full load (100mA), the dropout voltage is typically 300mV. Design the input voltage accordingly to maintain regulation.

5. Regulation Parameters:

   • Both load and line regulation are specified to ensure stable output under varying conditions.
   • The Power Supply Rejection Ratio (PSRR) of 60dB at 1kHz helps in filtering out noise from the power supply.

6. Temperature Range:

   • Operate the device within the temperature range of -40掳C to +85掳C to ensure reliable performance.

7. Capacitor Requirements:

   • Typically, external capacitors may be required for stability and transient response. Refer to the datasheet for specific values and types recommended by the manufacturer.

(For reference only)