Details

---

BUY YT2601 https://www.utsource.net/itm/p/12604796.html

Parameter	Symbol	Value	Unit
Operating Voltage	Vop	2.7 to 5.5	V
Quiescent Current	IQ	1.0	渭A
Output Current	Iout	300	mA
Dropout Voltage	Vdo	0.3	V
Operating Temperature	Topr	-40 to +85	掳C
Storage Temperature	Tstg	-65 to +150	掳C
Load Regulation	RL	卤0.5%
Line Regulation	LL	卤0.01%
PSRR (10 Hz to 100 kHz)	PSRR	70 to 90	dB
Transient Response	TR	卤20 mV

Instructions for Using YT2601

1. Power Supply Connection:

   • Connect the input voltage (Vop) to the IN pin.
   • Ensure the input voltage is within the specified range of 2.7V to 5.5V.

2. Ground Connection:

   • Connect the GND pin to the system ground.

3. Output Connection:

   • Connect the OUT pin to the load or circuit requiring regulated power.
   • The output current should not exceed 300mA.

4. Capacitor Placement:

   • Place a 1渭F ceramic capacitor between the IN pin and GND as close as possible to the device.
   • Place a 1渭F ceramic capacitor between the OUT pin and GND to ensure stability.

5. Thermal Management:

   • Ensure adequate heat dissipation if operating at high output currents or in high ambient temperatures.
   • The device can operate up to +85掳C, but performance may degrade at higher temperatures.

6. Transient Response:

   • The device has a transient response of 卤20mV. Ensure that the load does not cause rapid changes in current that exceed this limit.

7. Storage:

   • Store the device in a dry environment with temperatures between -65掳C and +150掳C.

8. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal components.

9. Testing:

   • Before final assembly, test the device in a controlled environment to ensure it meets the required specifications.

10. Compliance:

    • Ensure that the design complies with all relevant safety and regulatory standards.

(For reference only)