Details

---

BUY BYV79E-200 https://www.utsource.net/itm/p/12604801.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Reverse Voltage	VR	-	200	-	V	Maximum reverse voltage
Forward Current	IF	-	1	1.5	A	Maximum forward current (continuous)
Peak Forward Current	IFM	-	10	-	A	Maximum peak forward current (10 ms, 1% duty)
Forward Voltage	VF	1.2	1.4	1.6	V @ IF=1A	Forward voltage drop at specified current
Reverse Current	IR	-	100	-	nA @ VR=200V	Reverse leakage current at maximum reverse voltage
Operating Temperature	Tj	-40	-	125	掳C	Junction temperature range
Storage Temperature	Ts	-65	-	150	掳C	Storage temperature range

Instructions for Use:

1. Reverse Voltage (VR):

   • Ensure that the reverse voltage applied to the diode does not exceed 200V to avoid breakdown.

2. Forward Current (IF):

   • The continuous forward current should not exceed 1A. For peak conditions, ensure that the peak forward current does not exceed 10A for durations of 10 ms with a 1% duty cycle.

3. Forward Voltage (VF):

   • The forward voltage drop is typically between 1.2V and 1.6V when the forward current is 1A. This should be considered in power dissipation calculations.

4. Reverse Current (IR):

   • The reverse leakage current should not exceed 100 nA at a reverse voltage of 200V. Higher temperatures or voltages may increase this leakage.

5. Operating Temperature (Tj):

   • The junction temperature should be maintained between -40掳C and 125掳C to ensure reliable operation. Proper heat sinking may be required for high current applications.

6. Storage Temperature (Ts):

   • Store the diode in an environment where the temperature ranges from -65掳C to 150掳C to prevent damage.

7. Mounting:

   • Ensure proper mounting and soldering techniques to avoid mechanical stress and thermal issues. Follow recommended soldering profiles and use appropriate flux.

8. Handling:

   • Handle the diode with care to avoid static discharge and physical damage. Use ESD-safe equipment and practices.

9. Testing:

   • Before installation, test the diode for any defects using a multimeter or diode tester to ensure it meets the specified parameters.

10. Compliance:

    • Ensure that the application complies with relevant safety and regulatory standards.

(For reference only)